1220SA Automatic insertion force testing machine parameters and configuration for more information: 
 One. Insertion force testing machine Model 
 Model: 1220SA 
 II. Technical parameters 
 Maximum test load: 50kg, 20kg, 10kg, 5kg optional 1 
 Minimum Resolution: 0.01 
 Maximum measured height: 150mm 
 Measured speed range: 5 ~ 200mm/min 
 XY axis range :0-75mm 
 Transmission: ball screw 
 III. Tester Introduction 
 Solve a variety of connector test fixture problems, and testing male and female connectors can be automatically aligned, there will be no eating unilateral problems. 
 This machine is suitable for a variety of connector insertion force and withdrawal force of the test, with a patented design automatically find the heart device will receive the full and accurate insertion force test, use, set the screen window Chinese, simple operation, and all information Jieke storage (test conditions, the displacement curve, the life curve, inspection reports ---- and so on) of the products obtained national patent, patent number: 200620057696.2. 
 IV. Test items: 
 ★ connector plug hole test 
 ★ connector plug test row 
 ★ Single Pin connector with plastic retention test 
 ★ test connector NORMAL FORCE 
 ★ general compression, tensile failure test 
 ★ constant tension test 
 ★ constant pressure test 
 ★ connector plug life test 
 ★ shrapnel load displacement measurement 
 V. Machine features: 
 ※ store graphics can be printed (plug displacement curve, the life curve, inspection reports, cross-track curve) 
 ※ pieces of test conditions are set by the computer screen, convenient and fast (with plug stroke, speed, pause time, etc.) 
 ※ test data stored on the hard disk (for a single Jieke storage, unlimited) 
 ※ check payable to the contents of the report can be modified at any time 
 ※ inspection report to an editor can transcoding 
 ※ constant pulling pressure set percentage of the value of the protection force 
 ※ Load double protection, in order to effectively protect the load cell 
 ※ test data can be amended at any time test 
 ※ test unit can be converted 
 ※ automatically do statistics (mean, maximum, minimum) 
 ※ Dynamic impedance (optional)